Athena Hero 240W TC Mod
Sorry, this item is temporarily out of stock.
Introducing the Athena Hero 240W. If you're a dedicated vaping enthusiast and want the very latest in high end power devices then look no further. The Athena Hero 240W is a complete blitz on the senses, just read the specs below and I think you'll agree if you want the biggest and the baddest then this is it.
- Variable Wattage: 5.0W - 240W
- Input Voltage: 8 - 12.6V, 3 x 18650 (In Series)
- Output voltage: 0 - 10V
- Battery Requirements: Unprotected/Minimum Continuous Discharge Rating of 25Amp
We recommend the Aspire 18650 ICR 1800mAh 40A Battery
- Coil resistance range: 0.05 - 4.0ohm
(For Coils between 0.45-4.00ohm the chip will provide a maximum voltage output of 10V)
Ni200: 0.05 - 0.5ohm
Titanium: 0.1 - 0.6ohm
Stainless Steel: 0.2 - 1.0ohm
Kanthal: 0.1 - 0.45ohm
- Operating Modes: Power & Temperature Control modes
- Standby Current: Less than 200uA
How does the Mode Adjustment work?
Press the fire button 4 times to switching Power mode to TEMP C Mode. In temperature control mode, the power adjustment settings will not work and wattage will be set automatically. When switching from other modes to temperature control mode, the wattage will switch to temperature automatically. Using Kanthal coil tank will automatically revert to POWER mode also.
How does temperature control mode work?
TEMP C Mode: There are 6, press the fire button three times to enter the settings menu. Use the +/- buttons to scroll through the different modes.
Once you have set your desired maximum temperature, the chip will automatically detect the change in the coil material’s resistance, calculate the current temperature, and adjust the wattage to maintain the desired temperature.
For our full range of eliquids visit http://www.rainbowvapes.co.uk